|
Capacitor Cross Reference |
|
This guide provides the necessary information to derive an equivalent Johanson Technology part number from another vendor’s part number.
| SIZE: |
The EIA designated case size should match original. |
| CAPACITANCE: |
The nominal capacitance value should match original. |
| TOLERANCE: |
The capacitance tolerance expressed as either a percentage (±5%) of the nominal value or as an absolute capacitance value (±0.1 pF) should match or be smaller than original. |
| VOLTAGE: |
Rated DC voltage should match or be greater than the original. |
| DIELECTRIC: |
Vendor descriptions vary but the series listed are equivalent. |
| TERMINATION: |
Vendor descriptions vary but are either plated nickel barrier style or Gold. Termination style should match original. |
| PACKAGING: |
Vendor descriptions and specifications (i.e. tape reel size & quantity) vary. |
| MARKING: |
Should match original (usually not critical). |
This guide provides the necessary information to derive an equivalent Johanson Technology part number from another vendor’s part number. Johanson Technology Inc. supplies the information contained herein based on the vendor data available at the time of publication and for reference only. Vendors frequently change part number designations and device specifi cations. Critical characteristics should be evaluated on an in circuit basis and be specifi ed in a source control drawing.
Competitive Matrix
RF MLC Part Number Cross Reference
<< Return to Cross Reference Charts
|
