Login     Register

Mechanical & Environmental Characteristics

The following data applies to all RF Ceramic Components except BP43 Filters.

Requirements Procedure
Solderability:

No apparent damage.
More than 75% of the terminal electrode shall be covered with new solder

Preheat : 120 ± 5°C
Solder : 230 ± 5°C for 5 ± 1 sec
Thermal Shock:
(Temperature Cycle)

No apparent damage.
Fulfill the electrical specification after test.

One cycle/step 1: 85 ± 5°C for 20sec
One cycle/step 2: -40 ± 3°C for 20sec
Cycle time:30min
No. of cycles:100
Recovery: 1-2hrs

Heat Resistance: No apparent damage.
Fulfill the electrical specification after test.
Temperature : 85 ± 2°C
Duration : 24 ± 2 hrs
Recovery : 1-2hrs
Low Temperature Resistance: No apparent damage.
Fulfill the electrical specification after test.
Temperature : -40 ± 5°C
Duration : 24 ± 2 hrs
Recovery : 1-2hrs
Humidity Resistance: No apparent damage.
Fulfill the electrical specification after test.
Temperature : 85 ± 2°C
Humidity : 80 ~ 85% RH
Duration : 1000 ± 48 hrs
Recovery : 1-2hrs
Drop Shock: No apparent damage. Dropped onto hard wood from height of 50 cm for 3 times ; each x,y and z direction except terminal direction

*Operating temperature range : -40°C ~ + 85°C

 

 
 

Part Locator
  • Part Number Search
  • RF Components
Sales Reps
Distributors
Corporate Responsibility
Prototyping Kits
Cross Reference Charts
Designer Libraries
Modeling Software
Johanson Technology, Inc.

4001 Calle Tecate
Camarillo, CA 93012

(805) 389-1166 phone
(805) 389-1821 fax
Copyright © 2014 Johanson Technology
All rights reserved.