Skip navigation

High-Q Capacitance Matching

To use a high-Q capacitor at higher frequencies, a common solution is to replace it with several capacitors that have lower values arranged in a parallel position. For example, a 30pF capacitor can be replaced with three 10pF capacitors.
At Johanson, we have the ability to use capacitors with a wider capacitance tolerance and match them. This leads to a tighter tolerance for the overall capacitance value. For instance, we can use three capacitors at 10pF with a 5% tolerance and match them to get 30pF with a 1% tolerance. The result is an increase in frequency range, while keeping the cost down. We can deliver these matched capacitors in a matched set (small and medium size capacitors), or already mounted in a capacitor assembly (large size capacitors, i.e. 2525 and 3838).

For inquiries, contact us at: Contact us

Related

High-Power RF Coupler

Johanson Technology's high-power RF couplers, part number 0850HC47A0300001E, is designed for wireless applications, such as LTE/4G/5G, DCS, and AMPS. Operating in the 700 – 1000 MHz frequency range...

Enhancing Connectivity with Johanson Technology's Chip Antennas and I-SYST’s Versatile BLE Modules

In the dynamic realm of wireless communication, i-SYST's BLE modules—BLYST Nano, BLYST840, BLYSTL15, and BLYSTH20—integrate advanced Johanson Technology chip antennas to ensure robust and efficient...